Playback; Playing Back The Video - Canon PICTBRIDGE DC220 Instruction Manual

- "ready and waiting" to resume
recording.
• Sometimes the standby lamp will
flash as the camcorder completes
some preparations. The camcorder is
Quick-Start ready when the lamp stops
flashing and stays on.
2
When you wish to resume
recording, press
again.
Within approx. 1 second, the
camcorder is ready in record pause
mode.
NOTES
When you wake up the camcorder from
standby mode, the following settings will be
changed automatically:
- Manual focus returns to automatic focus (AF).
- Manual exposure adjustment returns to
automatic exposure.
- Zoom position returns to full wide angle W.
In standby mode, the camcorder consumes
only half the power used in record pause mode.
Using this mode you can save energy when
using a battery pack.
The camcorder will shut off if left in the Quick-
Start ready mode for 10 minutes, regardless of
the [POWER SAVE] setting (
select the length of time until shut-off with the
[ STANDBY OFF] setting (
To restore the power if the camcorder shut off,
slide the power switch toward MODE and
release it, or move the power switch to
back to ON again.
If you perform any of the following actions
while in standby mode (while the standby lamp
is on), the camcorder will return to record pause
mode.
- Open the disc compartment cover.
- Slide the power switch toward MODE.
- Change the position of the
QUICK START
50). You can
50).
and
/ switch.

Playback

Playback

Playing Back the Video

POINTS TO CHECK
For some operations you
can also use the buttons on the wireless
controller.
1
Move the power switch to ON, then
slide it down toward MODE and
release it to set the camcorder in
PLAY mode.
The green PLAY indicator will turn on.
2
Move the /
(Movies) position.
The scene index screen appears with
the selection frame on the first scene.
Playback 39
( 12)
switch to the