Canon PICTBRIDGE DC220 Instruction Manual page 24

24 Getting Started
T
O REMOVE THE BATTERY PACK
Slide down
BATT.
battery pack, and pull out the battery
pack holding it from the ridge on its
bottom part.
IMPORTANT
Turn off the camcorder before connecting or
disconnecting the compact power adapter. After
you turn off the power switch to
file allocation data is updated on the disc. Be
sure to wait until the LCD display is completely
off.
You may hear some noise from the compact
power adapter during use. This is not a
malfunction.
We recommend charging the battery pack in
temperatures between 10 °C and 30 °C (50 °F
and 86 °F). Outside the temperature range of
0 °C to 40 °C (32 °F to 104 °F), the charging will
not start.
Do not connect to the camcorder's DC IN
terminal or to the compact power adapter any
electrical equipment that is not expressly
recommended for use with this camcorder.
To prevent equipment breakdowns and
excessive heating, do not connect the supplied
to release the
, important
compact power adapter to voltage converters for
overseas travels or special power sources such
as those on aircraft and ships, DC-AC inverters,
etc.
NOTES
The CHG (charge) indicator also serves as a
rough estimate of the battery charge status.
Continuously on: Battery fully charged.
Flashes approx. twice per second: Battery over
50% charged.
Flashes approx. once per second: Battery less
than 50% charged.
The charging time will vary depending on the
surrounding temperature and the battery pack's
initial charge condition. In cold places, the
effective usage time of the battery will
decrease.
We recommend that you prepare battery
packs 2 to 3 times longer than you think you
might need.
U.S.A. and Canada only: The lithium
ion/polymer battery that powers this
product is recyclable. Please call
1-800-8-BATTERY for information
on how to recycle this battery.