Video Input Recording - Canon PICTBRIDGE DC220 Instruction Manual

82 Connecting to a TV or VCR

Video Input Recording

You can input video from an analog video
source (VCR, TV, etc.) and record it on
the disc in the camcorder.
Connecting
Connect the camcorder to the analog
input source following the connection
diagram shown in the previous section
Connection Diagrams (
Recording
FUNC.
( 31)
MENU*
FUNC.
LINE-IN MODE
Press (
video input screen.
* Only when using a DVD-RW recorded in VR
mode. With discs recorded in VIDEO mode,
pressing will open the menu directly
FUNC.
on the setup menus screen.
F
ROM THE VIDEO INPUT SCREEN
The following icons are displayed at the
bottom of the video input screen:
: Adjust the speaker volume (will not
affect the recording).
/ / : Select the recording mode.
( 12)
80).
) to display the
/ : Start recording/pause the
recording.
: Terminate the video input and return
to mode.
1
This camcorder: Change the
recording settings as necessary.
2
Connected device: Load the
recorded cassette or disc and start
playback.
3
This camcorder: Select (
icon. When the scene you wish to
record appears, press (
Recording starts.
4
This camcorder: To pause the
recording, select (
press ( ).
In record pause mode, select (
and press (
recording.
T
O STOP RECORDING
5
This camcorder: In record pause
mode, select (
( ).
6
Connected device: Stop the
playback.
IMPORTANT
Video input that includes copyright signals
(for example, digital content designated as
"copy once" or copy protected) cannot be
recorded. The video input will be recorded
normally until the point a copyright signal is
detected.
Depending on the analog signal sent from the
connected device the input image may be
distorted or not be displayed at all (for example,
video input that includes anomalous signals
such as ghost signals).
NOTES
We recommend powering the camcorder with
the compact power adapter.
) the
).
) and
)
) to resume
) and press