Canon PICTBRIDGE DC220 Instruction Manual page 106

106 Trouble?
Message
PRINT ERROR
HARDWARE ERROR
COMMUNICATION
ERROR
CHECK PRINT SETTINGS
INCOMPATIBLE PAPER
SIZE
PRINTER IN USE
PAPER LEVER ERROR
PRINTER COVER OPEN
NO PRINTHEAD
Cancel printing, disconnect the USB cable and turn off the printer. After a
while, turn the printer back on and reconnect the USB cable. Check the
printer status.
When you are printing using the
settings.
Cancel printing. Turn off the printer and turn it back on. Check the printer
status. If the printer is equipped with a battery, it might be exhausted. In
such case, turn off the printer, replace the battery and turn it back on.
The printer is experiencing a data transfer error. Cancel printing,
disconnect the USB cable and turn off the printer. After a while, turn the
printer back on and reconnect the USB cable.
printing using the button, check the print settings.
Or, you attempted to print from a memory card that contains a large
number of images. Reduce the number of images.
The print settings cannot be used for printing with the
The paper settings of the camcorder conflict with the printer's settings.
The printer is in use. Check the printer status.
Paper lever error occurred. Adjust the paper selection lever to the proper
position.
Close the printer cover securely.
No print head is installed in the printer or the print head is defective.
Explanation
button, check the print
When you are
button.