Canon PICTBRIDGE DC220 Instruction Manual page 103

Message
• TEMPERATURE TOO
HIGH CANNOT RECORD
• TEMPERATURE TOO
HIGH CANNOT REMOVE
DISC
CANNOT RECORD
CHECK THE DISC
REACHED THE MAXIMUM
NUMBER OF SCENES
CANNOT PLAY DISC
CANNOT EDIT DISC
CANNOT DIVIDE THE
SCENE
PLEASE USE ONLY THE
RECOMMENDED DISCS
DISC IS FINALIZED
CANNOT RECORD
UNFINALIZE THE DISC
DISC IS PROTECTED
CANNOT READ THE DISC
CHECK THE DISC
The camcorder has exceeded its operational temperature.
Disconnect the compact power adapter and remove the battery and
let the camcorder cool down before resuming use.
There is a problem with the disc. Replace the disc.
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
The disc's recording surface may be dirty or scratched.
The maximum number of scenes has been reached. Delete some
recordings (DVD-RW in VR mode) to free some space or replace
the disc.
The disc is dirty or you attempted to play back a disc type not
supported (not DVD-R/RW).
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
There are no scenes to edit or the recording is damaged.
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
Photomovie scenes cannot be divided.
You may not be able to divide very short scenes.
Scenes cannot be divided when the disc already contains 999
scenes.
You may not be able to further divide scenes shorter than 5
seconds that were created by dividing a previous scene.
The dual-layered disc you inserted cannot be used with this
camcorder.
You cannot record additional scenes on a finalized DVD-R/
DVD-R DL disc.
You cannot record additional scenes or unfinalize a DVD-RW disc
in VIDEO mode that was finalized with another digital device.
You cannot record additional scenes or convert still images to a
Photomovie scene on a finalized DVD-RW in VIDEO mode.
Unfinalize the disc first.
The disc is protected. Replace the disc or remove the disc
protection.
Disc could not be read. Try cleaning it or replace the disc.
This message can also appear if the camcorder has exceeded its
operational temperature. Turn off the camcorder and let it cool
down before resuming use.
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
The disc may not be loaded correctly. Try removing the disc and
reinserting it.
Explanation
Trouble? 103
–
26
110
–
26
69
–
110
–
110
74
–
–
–
6
–
–
79
71
108
–
110
26