Initializingthe Disc; Disc Playback On An Externaldevice; Changingthe Disctitle - Canon DC410 Instruction Manual

initializingthe Disc
You need to initialize all new DVD-RW
discs when you first insert them into the
camcorder and you may have to
initialize them if you get the message
[UNABLE TO RECOGNIZE THE DATA].
You can also initialize a DVD-RW disc
when you want to completely erase the
disc to reuse it or in order to change the
disc specification.
Disc type: ® DVD-RW
[_ MENU] C)
[0 DISC OPERATIONS[ O
[INITIALIZE DISC] O
Select a disc specification* O
[YES] O
_**
* Fordetals about disc specifications, refer to
Disc specification on DVD-RWs. (_ 5)
**Close the menu only after the screen display
returns to the [O DISC OPERATIONS]
menu.
I£1?OITAIT
Initializing the disc will permanently erase
all recordings. Lost original recordings
cannot be recovered.
_;i_!;=ii;!i_ii!i!iilSil _ O_ i;;;:i_! ¸¸ ;!i)_=
Disc Playback on an
ExternalDevice
Changingthe DiscTitle
Before you finalize your disc, you can
give it a title*. The disc title will be
displayed on the index screen when
playing the finalized disc in most DVD
players. You can check the disc's title
with the [DISC INFO] menu option
(C[3 69).
* You can change the title of DVD-RWdiscs
recorded in VR mode also after having
finalized them.
: ; ili ii i i :i i ([Z] 21)
[_ MENU] 10
[O DISC OPERATIONS] O
[DISC TITLE] O
Enter the title (up to 20
characters) 20
[SET] O [YES] O
1 Only when using a DVD-RW recorded in VR
mode. Otherwise, pressing IF_NCl]will open
the menu directly on the setup menus
screen.
2 Select one character at a time and press
to add it to the title. Select
[BACKSPACE]and press _,_ to delete the
character to the left of the cursor's position.
Video * 47