Canon PICTBRIDGE DC220 Instruction Manual page 100

100 Trouble?
Problem
The point where the start/stop
button was pressed does not
match the beginning/end of the
recording.
The recording suddenly stops
shortly after starting recording.
Camcorder will not focus.
Sound is distorted.
A vertical light bar appears on
the screen.
Viewfinder picture is blurred.
Playback/Editing
Problem
Pressing the playback button
does not start playback.
• During playback there is
video noise and the sound is
distorted.
• The disc cannot be read.
Cannot add scenes to the
playlist.
Cannot divide the scene.
There is a slight interval between pressing the start/stop button
and the actual start of the recording on the disc. This is not a
malfunction.
The disc is dirty. Clean the disc with a soft lens-cleaning cloth. If
the problem persists replace the disc.
The camcorder has exceeded its operational temperature. Turn
off the camcorder and let it cool down before resuming use.
Autofocus does not work on that subject. Focus manually.
Adjust the viewfinder with the dioptric adjustment lever.
Lens is dirty. Clean the lens with a soft lens-cleaning cloth.
Never use tissue paper to clean the lens.
When recording near loud sounds (such as fireworks or
concerts), sound may become distorted. This is not a
malfunction.
Bright light in a dark scene may cause a vertical light bar
(smear) to appear. This is not a malfunction.
Adjust the viewfinder with the dioptric adjustment lever.
Load a disc.
Set the camcorder to
You may not be able to play with this camcorder, discs recorded
or edited with other DVD recorders or computer DVD drives.
If using a single-sided disc, check that the disc is inserted with
the label side facing up.
The camcorder has exceeded its operational temperature. Turn
off the camcorder and let it cool down before resuming use.
The disc is dirty. Clean the disc with a soft lens-cleaning cloth.
You may not be able to play with the camcorder discs recorded
or edited with other DVD recorders or computer DVD drives.
The disc is full (" END" flashes on the screen). Delete some
recordings to free some space.
You cannot add more than 999 scenes to the playlist.
Remove the disc protection.
You cannot edit or delete scenes on a disc that was protected in
another digital device.
You cannot divide the scene if there are already 999 scenes on
the disc.
You cannot divide the scene if it is too short (1 second or less).
Solution
Solution
.
–
108
–
56
28
110
–
–
28
26
39
–
26
–
108
–
69
–
71
–
–
–