Introduction; The FyrTe Pro - Bacharach 100 Operation & Maintenance Manual

1.0 INTRODUCTION

1.1 The Fyrite Pro
The Fyrte Pro seres of nstruments are hand-held analyzers that are
desgned for on-demand samplng of resdental furnaces and applances.
The more advanced models can also to used to check combuston effcency
by measurng the stack temperature and the percent oxygen level n the
flue-gas stream.
The Fyrte Pro s completely upgradeable from the very smple Model 100
that measures only carbon monoxde, to the Model 125 that measures
carbon monoxde (CO), oxygen (O
ar temperature, stack temperature, and combuston ar temperature, as
well as calculatng combuston effcency, excess ar, carbon doxde (CO
dfferental temperature, and CO ar free.
Ths manual contans nformaton on all models of the Fyrte Pro. Please
dsregard any nformaton that does not pertan to your model.
This analyzer is not intended to be used on a continuous
basis.
This analyzer does not have an audible alarm, and is not
intended to be used as a safety device.
Except for battery replacement, this analyzer should only be
opened and serviced by authorized personnel.
When testing an appliance, a full visual inspection of the
appliance should be carried out to ensure its safe operation.
Instruction 24-9395
Fyrite Pro
), draft, dfferental pressure, ambent
2
WARNINGS!
),
2
1