3.5 Setup Mode
The analyzer s preset at the factory for the parameters shown below, but
can be changed as descrbed n ther assocated sectons.
Function
Fuel
Temperature Unt
CO Channel
Draft (Pressure)
Clock
Prnter Protocol
3.5.1 Entering Setup
1. Wth the analyzer turned OFF, press and hold down the hOlD
button.
2. Press the I/O button.
3. Release both buttons.
4. The analyzer s now n ts Setup Mode. Refer to Sectons 3.5.2 thru
3.5.8 for nformaton on how to set up each analyzer parameter.
3.5.2 Selecting Temperature Units
The Temperature Setup Screen s labeled "Unt."
1. Enter the Setup Mode per Secton 3.5.1. If necessary, repeatedly
press the eNTeR button untl "Unt" s dsplayed.
2. Press the or button untl the desred temperature unt (°F or
°C) s dsplayed.
3. Press eNTeR to move to the next Setup Screen, or I/O to ext setup.
12
Fyrite Pro
Parameter
Natural Gas (F1)
°F
Auto Zero (A2)
WC
Not Intalzed
IrDA
To Change
Secton 4.13.5
Secton 3.5.2
Secton 3.5.3
Secton 3.5.4
Secton 3.5.5 thru 3.5.7
Secton 3.5.8
Instruction 24-9395