3.5.7 Year Setup
The Year Setup Screen s labeled "YEAr".
1. Enter the Setup Mode per Secton 3.5.1. If necessary, repeatedly
press eNTeR untl the Year Setup Screen s dsplayed.
2. Press the or button untl the correct year s dsplayed.
3. Press eNTeR to move to the next Setup Screen, or I/O to ext setup.
3.5.8 Selecting Printer Protocol
The analyzer can be set up for ether an HP or IrDA type prnter.
1. Enter the Setup Mode per Secton 3.5.1. If necessary, repeatedly
press eNTeR untl one of the followng screens s dsplayed.
2. Press the or button to select the desred prnter protocol.
3. Press eNTeR to move to the next Setup Screen, or I/O to ext setup.
3.5.9 Exiting the Setup Screen
Press the I/O button at any tme to ext the Setup Mode and turn OFF the
analyzer. Note that the last dsplayed parameter s automatcally saved n
memory.
Instruction 24-9395
Fyrite Pro
15