Table of Contents
Advertisement
4.13.5 Fuel Screen
The Fuel Screen s dsplayed after warm-up, and s where an operator
chooses whch fuel s to be used by the analyzer to calculate combuston
effcency. Pressng the or button scrolls the dsplay through the fuel
codes. Pressng eNTeR selects the dsplayed fuel and places the analyzer
nto ts Run Mode. Note that the fuel code wll be dsplayed n the top rght
corner of all screens whle n the Run Mode.
Front Panel Button Functions:
– Dsplays next fuel code
– Dsplays prevous fuel code
eNTeR – Go to Run Mode (refer to Secton 4.12)
– No effect
hOlD
lIGhT – Toggles backlght ON/OFF
– Turns analyzer OFF (5 second delay)
I/O
4.13.6 O
Screen
2
The O
Screen shows the measured percentage of oxygen present n the
2
flue-gas stream.
Front Panel Button Functions:
– Dsplays next screen (refer to Secton 4.12)
– Dsplays prevous screen (refer to Secton 4.12)
– Freezes dsplay (press eNTeR to unfreeze)
hOlD
eNTeR – Hold for 2 seconds to dsplay Fuel Screen
lIGhT – Toggles backlght ON/OFF
– Turns analyzer OFF (5 second delay)
I/O
Instruction 24-9395
Fyrite Pro
(Model 110/120/125)
Fuel Codes:
F1 = Natural Gas
F2 = Ol #2
(Model 110)
F3 = LPG
F4 = Kerosene
�
35
Advertisement
Table of Contents
