4.9 Clearing Saved Test Data
Clear all saved test data as follows:
Note: If no test data has been saved, the option to clear
memory will not be available.
1. Wth the analyzer n ts Run Mode, press the hOlD button twice to
dsplay the Prnt Screen.
2. Press the or button to scroll to the Clear Screen, and then press
eNTeR to dsplay the Clear All Screen.
3. Press eNTeR agan to clear memory and return to the Hold Mode, or
press hOlD to return to the Hold Mode wthout clearng memory.
4.10 Turning OFF the Analyzer & CO Purge
Press the I/O button to turn OFF the analyzer. The unt wll count down
from 5 before turnng OFF, thus allowng tme for the operator to abort the
turn OFF process by pressng the eNTeR button.
If a hgh CO level s detected at turn OFF, the unt wll reman ON wth
ts pump runnng and dsplay "PUrG CO". The countdown from 5 wll not
begn untl the detected CO level drops below 50 ppm. Although not recom-
mended, the purgng process can be bypassed by pressng the I/O button a
second tme.
28
Fyrite Pro
(Model 105/110/120/125)
Instruction 24-9395