Table of Contents
Advertisement
Connect a length of tube from the open end of
the quick connect tee from the valves to the
fitting on the back of the backwash controller
enclosure as shown in the picture. Connect tube
from remaining quick connect fitting and connect
to drain.
This completes the installation of the backwash controller (CS400) for single tank systems. Please
see Owner's/Operator's Manual for backwash controller set up and operation.
Diaphragm Valve Face Piping Kit Installation Manual
Pg. 38 of 52
5/31/12
Rev. F
Hide quick links:
Advertisement
Table of Contents
