Using The Projector As A Bluetooth Speaker - BenQ GK100 User Manual

Using the Projector as a Bluetooth speaker

Before you can use your projector as a Bluetooth speaker you must first ensure that you have installed the provided wireless dongle into the wireless
dongle port (see Installing the wireless dongle on page 26). Once you have done so you can activate Bluetooth speaker mode using either the
Bluetooth button on the projector or the BenQ Launcher interface.
Activating the Bluetooth speaker via the Bluetooth button
Press the Bluetooth button on the top side of the projector. If your projector is on when you press the button, the projector will stop projecting
and switch over to Bluetooth speaker mode.
Activating the Bluetooth speaker via BenQ Launcher
1. Power on the projector (see Starting up the projector on page 28).
2. Navigate to the settings menus section on the home screen and select Settings.
3. Select Bluetooth Speaker Mode.
4. Select OK to change to speaker mode.
Once Bluetooth mode has been activated you can pair your external device to the projector. After you have successfully paired your mobile device
with the projector, pairing information will be stored on both devices and a connection will automatically be made when Bluetooth is enabled on both
devices and both devices are within range of each other.
49