Turning The Screen Off During Music Playback; Connect The Projector To External Bluetooth Speaker / Headphone - BenQ Portable Series User Manual

Turning the screen off during music playback

You can enjoy music playback via the projector without a projection
screen.
Press the button on the remote control or projector, and select the
Audio-Only Mode to switch the projector to audio-only mode. The screen
is turned off while the music playback continues.
To stop the playback or to perform other operations, press any key on the
remote control to bring the projection screen back.
Playing music via a speaker with ARC
The HDMI port on the projector features Audio Return Channel (ARC)
capabilities which allows it to output its audio to an ARC-compatible
speaker connected via an HDMI cable.
1. Connect the ARC-compatible speakers to the projector via HDMI cable.
2. Disconnect other external speakers connected via Bluetooth or 3.5mm
audio jack.
Connect the projector to external
Bluetooth Speaker / headphone
Available only when the input source is ATV
1. Make sure the ATV dongle is installed properly (see
dongle" on page
2. Power on the projector (see
30).
3. Press the
28).
"Powering on and initial setup" on page
button on the remote control.
47
"Installing the ATV