The Bluetooth Speaker; Pairing With The Bluetooth Speaker - BenQ i500 User Manual

• To correct keystoning at the top of the image, use
• To correct keystoning at the bottom of the image, use
• When done, press BACK to save your changes and exit.
You may only make these adjustments if Auto Keystone is disabled in the Setting menu, see

The Bluetooth speaker

Once the projector is properly connected to a power source and on standby mode you can use the speakers located at the rear of the projector to
wirelessly broadcast audio from any Bluetooth-enabled mobile device.
The Bluetooth speaker and the projector cannot work simultaneously, in order to use the Bluetooth speaker the projector must be on standby mode.

Pairing with the Bluetooth speaker

Pairing is the process by which your mobile device creates a connection to the Bluetooth speaker for the first time. Once both devices have been
successfully paired each device will have the corresponding device's pairing information stored internally and both will be able to connect automatically
when they are within ~10 meter range of each other and Bluetooth is enabled on both devices.
To pair your mobile device to the Bluetooth speaker:
Use
on your remote control.
on your remote control.
Use
Auto Keystone on page 58
41
for details.