Table of Contents
Advertisement
•
To correct keystoning at the top of the image, use
•
To correct keystoning at the bottom of the image, use
•
When done, press BACK to save your changes and exit.
You may only make these adjustments if Auto Keystone is disabled in the Setting menu, see
Bluetooth pairing
The projector allows you to output audio directly to any Bluetooth-enabled speaker or headphones for greater sound particularly in outdoor settings.
Pairing with a Bluetooth speaker or headphones
Pairing is the process by which your projector creates a connection to a Bluetooth speaker or headphones for the first time. Once both devices have
been successfully paired each device will have the corresponding device's pairing information stored internally and both will be able to connect
automatically when they are within ~10 meter range of each other and Bluetooth is enabled on the projector.
To pair your projector to a Bluetooth speaker or headphones:
1. Power on the projector.
2. Press
on the projector or your remote control to display the source selection bar.
3. Select Bluetooth in the source list, the Bluetooth setting menu will launch.
4. Select the Bluetooth switch in the Bluetooth setting menu and press OK on the projector or your remote control so that the Bluetooth switch
is in the enabled position.
5. Activate Bluetooth-pairing mode on the speaker or headphones.
Use
on your remote control.
on your remote control.
Use
Auto Keystone on page 64
46
for details.
Advertisement
Table of Contents
