Installation; Start On/Off - BenQ GK100 User Manual

Installation

The following table describes the items available in the Installation menu:
Item
Displays the test pattern grid, which helps you adjust the image size and focus to check if the projected image is free of
Test Pattern
distortion.
We recommend you use the High Altitude Mode when your environment is between 1500 m - 2000 m above sea level, and
ambient temperature is between 0˚C to 30˚C.
Operation under High Altitude Mode may cause a higher decibel operating noise level because of increased fan speed
necessary to improve overall system cooling and performance.
If you use this projector under other extreme conditions excluding the above, it may display auto shut-down symptoms, which is
High Altitude
designed to protect your projector from over-heating. In cases like this, you should switch to High Altitude Mode to solve
Mode
these symptoms. However, this is not to state that this projector can operate under any and all harsh or extreme conditions.
Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and ambient temperature is between 0˚C to 35˚C. The projector
will be over cooled, if you turn the mode on under such a condition.

Start On/Off

Allows you to set a timer for when the projector will automatically power off. The options include: Disable, 15 min, 30 min, 45 min, 60 min, 120
min, and 240 min
Options and descriptions
62