Wireless Connections; Connecting The Projector To A Wireless Network - BenQ GK100 User Manual

Wireless Connections

Connecting the projector to a wireless network

Before you can project wirelessly via the projector you must first connect the projector to a wireless network. To connect your projector to a wireless
network, or to switch wireless networks:
If you have already connected the projector to a wireless network during the setup wizard you may skip this section.
1. Install the provided wireless dongle into the wireless dongle port (see Installing the wireless dongle on page 26).
2. Power on the projector (see Starting up the projector on page 28).
3. On the home screen of the BenQ Launcher interface, select No Internet in the wireless projection buttons section.
4. Enable Wireless.
39