Power Connector Cable - HP Pavilion 17-AR050WM Maintenance And Service Manual

f. Remove the wireless antenna cables and transceivers (3).
The wireless antenna cables and transceivers are available using spare part number 933461-001.
Reverse this procedure to reassemble and install the display assembly.

Power connector cable

Description
Power connector cable
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the optical drive (see
a. Bottom cover (see
b. Battery (see
c. Display assembly (see
Remove the power connector cable:
1. Disconnect the power connector cable (1) from the system board.
2. Release the power connector cable from the retention clips (2) and routing channel built into
the keyboard/top cover and right speaker.
54 Chapter 5 Removal and replacement procedures
Optical drive on page
Bottom cover on page
Battery on page 27)
Display assembly on page
24), and then remove the following components:
25)
46)
Spare part number
810327-006