Copy Mode; Scan Mode; Display (Standby Mode) - Canon ImageCLASS D420 Basic Operation Manual

Display (Standby Mode)

Display (Standby Mode)

Copy Mode

This section describes the copy standby mode. Be
sure to press
following display whenever using copy functions:
1 0 0 %
T E X T / P H O T O
①Zoom ratio
②Paper size
③Quantity
④Image quality
⑤Density
1-10
[COPY] to switch to the
L T R
1

Scan Mode

This section describes the scan standby mode. For
D460, press [SCAN] repeatedly to select <USB
SCANNING> or <NETWORK SCANNING>.
U S B S C A N N I N G
N E T W O R K S C A N N I N G
For D440/D420, press
<SCANNING MODE>.
S C A N N I N G M O D E
– Depending on your needs, you can change the standby
display which appears when the main power switch is turned
ON. For details, see "Introduction of the Machine, " in the e-
Manual.
– When the main power switch is turned ON, the display
displays <PLEASE WAIT> until the standby display appears.
– If the machine remains idle for one minute, the display returns
to the standby mode (Auto Clear Function).
[SCAN] to display