Entering Characters
Entering Characters
For displays that require alphanumeric entries, follow the procedure below to enter
characters.
Example: Enter <Canon>.
You can enter the following characters in each input mode:
Use
–
[numeric keys] to enter characters.
●
●
Press
–
Press
to enter symbols.
●
Press
to switch between input modes:
●
–
[A]: Letter mode
–
[1]: Number mode
●
Press [
] or [
Press
[Clear] to delete the character at the cursor position. Hold
●
1-14
[numeric keys] repeatedly until the required character appears.
] to move the cursor position.
[Clear] to delete the entire entry.