Onkyo TX-8390 Instruction Manual page 74

Settings that can be registered
The following settings can be registered with MY INPUT.
– Input selector (Network service or DAB (European models)/AM (North
American models)/FM radio stations can also be registered.)
– Listening mode
– Volume level (Upper limit "82")
– Output destination (Multi Zone)
– TREBLE/BASS/BALANCE, etc.
* When AM/FM/DAB radio stations are registered, TUNER's preset numbers "37",
"38", "39" and "40" ( p66) are overwritten.
Using the registered settings
1. Turn the MY INPUT dial to select one of the indicators 1 to 4 where the
settings are registered.
2. Press the MY INPUT dial.
• Even when the unit is in standby mode, it comes on when you press the MY
INPUT dial.
• When the main unit is in standby mode and you press the MY INPUT dial, the
MY INPUT (setting) selected immediately before the unit entered standby is
selected.
Checking the registered settings
1. In the Setup menu screen that appears when you press SETUP, select "1.
Input/Output Assign" - "5. MY INPUT Information" ( p84), and press
ENTER.
2. The registered settings are displayed in the list.
• Some of the items such as TREBLE/BASS/BALANCE function are not
displayed in the list.
Contents Connections
≫
74
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫ ≫