Onkyo TX-8390 Instruction Manual page 24

Connecting a Power Amplifier
Power amplifier
a Analog audio cable
Contents
a
Connections
≫
You can connect a power amplifier to the unit and use the unit as a pre-amplifier
in order to produce a large volume that cannot be output with the unit only.
Connect the front speakers to the power amplifier. For details, refer to the power
amplifier's instruction manual.
• Use the PRE OUT FRONT jacks for connection as show on the left.
Setup
• Settings are required to output audio to the power amplifier. Press SETUP on
the remote controller, and set "2. Speaker" - "Configuration" - "Zone 2 Lineout"
( p85) to "Front".
24
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫ ≫