Onkyo TX-8390 Instruction Manual
  1. Manuals
  2. Brands
  3. Onkyo Manuals
  4. Stereo Receiver
  5. TX-8390
  6. Instruction manual

Onkyo TX-8390 Instruction Manual

Network stereo receiver
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
NETWORK STEREO RECEIVER
TX-8390
Instruction Manual
En
Table of contents
Connections
- Connecting Speakers
Playback
Setup
Troubleshooting
Appendix
Supplementary Information
Front Panel≫ Rear Panel≫ Remote≫
≫
≫
≫
≫
≫
≫
≫
≫

Advertisement

Table of Contents
loading

Related Manuals for Onkyo TX-8390

Summary of Contents for Onkyo TX-8390

  • Page 1 NETWORK STEREO RECEIVER ≫ Table of contents TX-8390 ≫ Connections Instruction Manual ≫ - Connecting Speakers ≫ Playback ≫ Setup ≫ Troubleshooting ≫ Appendix ≫ Supplementary Information Front Panel≫ Rear Panel≫ Remote≫...
  • Page 2 Contents Connections Playback Setup ≫ ≫ ≫ ≫ What’s in the box Connecting a TV (ZONE 2) Additional Function (Firmware Update) Connecting a Pre-main Amplifier (ZONE 2) Update Information of the firmware Connecting Antennas Network Connection Operation of added new functions Firmware Update Procedure Connecting External Control Devices Part Names...
  • Page 3 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playing MQA files Listening To the AM/FM Radio (AM: North American models only) Playing MQA files Listening to DAB Digital Radio USB Storage Device (European models only) Basic Operations Presetting a Radio Station Device and Supported Format Multi-zone Playing back files on a PC and NAS (Music Server)

  • Page 4: Troubleshooting

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ 5. Hardware 6. Multi Zone 7. Miscellaneous AUDIO Menu Menu operations Web Setup Menu operations Initial Setup with Auto Start-up Wizard Operations Troubleshooting When the unit is operating erratically Troubleshooting Appendix Reducing the Power Consumption in Standby State 115 About HDMI General Specifications Front Panel≫...

  • Page 5: This Happens, Unplug The Power Cord From The Wall Outlet, Wait At Least

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ What’s in the box 1. Main unit (1) 2. Remote controller (RC-975S) (1), Batteries (AAA/R03) (2) 3. Speaker setup microphone (1) • Used during Initial Setup. 4. Indoor FM antenna (For North American models only) (1) 5.
  • Page 6 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Additional Function (Firmware Update) This unit is equipped with a function to update the firmware via network or USB port when the firmware update is announced after purchase. This enables various functions to be added and operations to be improved. Depending on the manufacturing timing of the product, the firmware may be switched to the updated one.
  • Page 7 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Firmware Update Procedure The update may take approx. 20 minutes to complete via network or via USB Update port. Existing settings are guaranteed in either updating method. 1. Press SETUP. When this unit is connected to the network, notifications of firmware updates The Setup menu is displayed on the TV screen.
  • Page 8 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 4. Press ON/STANDBY on the main unit to turn the unit into standby mode. • Turn off control devices (PC etc.) connected to the network. • Stop an Internet radio, USB storage device, or server content being played. The process is completed, and your firmware is updated to the latest version.
  • Page 9 Contents Connections Playback Setup ≫ ≫ ≫ ≫ If an Error Message is Displayed Setup If an error occurs, "- Error!" is displayed on the display of the unit. ("" represents an alphanumeric character.) Refer to the following descriptions and 1.
  • Page 10 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Part Names Front Panel                     ‰ For details, see ( p11) Front Panel≫ Rear Panel≫ Remote≫...
  • Page 11 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ON/STANDBY button speakers. 18. MY INPUT dial/indicators: You can register settings conditions such as the 2. HYBRID STANDBY indicator: Lights up when any of the following functions is current input selection or listening mode, and then recall them. The indicator working or enabled in standby state of this unit.
  • Page 12 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Display 1. Speaker/Channel display: The currently selected speaker system lights. FM ST: Receiving FM stereo. 2. Lights in the following conditions. SLEEP: Sleep timer is set. ( p93) : Headphones are connected. AUTO STBY: Auto Standby is set.
  • Page 13 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Rear Panel (North American models)             90° 180°      ‰ For details, see ( p15) Front Panel≫ Rear Panel≫...
  • Page 14 Contents Connections Playback Setup ≫ ≫ ≫ ≫ (European models)             90° 180°      ‰ For details, see ( p15) Front Panel≫ Rear Panel≫ Remote≫...
  • Page 15 Adjust the angles according to the connection status. 5. IR IN/OUT terminals: Connect a remote control receiver unit. ( p34) 6. REMOTE CONTROL jack: An Onkyo product with RI ("Remote Interactive") jack can be connected and synchronized with this unit. ( p29) 7.
  • Page 16 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Remote Controller ON/STANDBY button 2. INPUT SELECTOR buttons: Switches the input to be played.   3. Play buttons: Used to control play of a Music Server ( p50) or device connected via USB ( p47), or of RI connected devices.
  • Page 17 Contents Connections Playback Setup ≫ ≫ ≫ ≫ or USB. (random) turns on or off each time you press the button. MODE button (North American models): Switches between automatic tuning and manual tuning for AM/FM stations ( p61). MODE button (European models): Switches tuning to an FM station between automatic tuning and manual tuning ( p61), and allows you to select the order for displaying DAB stations (...
  • Page 18 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connections Connecting speakers Connecting the TV Connecting Playback Devices Connecting an AV Component in a Separate Room (Multi-zone Connection) Connecting Antennas Network Connection Connecting External Control Devices Connecting the Power Cord Front Panel≫ Rear Panel≫ Remote≫...
  • Page 19 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting speakers Speaker Connections and "Speaker Setup" Settings Connections „ (Note) Speaker Impedance Connect speakers with an impedance of 4 Ω to 16 Ω. When using the 2.1 Channel System (A+B) ( p22) for simultaneous output from SPEAKER A and B, connect speakers with 8 Ω...
  • Page 20 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Connect the Subwoofer a Subwoofer cable Connect a powered subwoofer with this unit using a subwoofer cable. Up to two powered subwoofers can be connected. The same signal is output from each SUBWOOFER PRE OUT jack.
  • Page 21 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 2.1 Channel System (SPEAKERS A) "Speaker Setup" settings during „ Initial Setup ( p101) Speaker Setup Subwoofer < > Speaker B A / B Zone 2 Lineout Zone 2 Speaker Impedance 6ohms or above Specifies whether the powered subwoofer is connected or not.
  • Page 22 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 2.1 Channel System (SPEAKERS A+B) "Speaker Setup" settings during „ Initial Setup ( p101) Speaker Setup Subwoofer < > Speaker B A / B Zone 2 Lineout Zone 2 Speaker Impedance 6ohms or above Specifies whether the powered subwoofer is connected or not.
  • Page 23 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 2.1 Channel System (Bi-wiring the Speakers) "Speaker Setup" settings during „ Initial Setup ( p101) Speaker Setup Subwoofer < > Speaker B Bi-Wiring Zone 2 Lineout Zone 2 Speaker Impedance 6ohms or above Specifies whether the powered subwoofer is connected or not.
  • Page 24 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting a Power Amplifier Power amplifier You can connect a power amplifier to the unit and use the unit as a pre-amplifier in order to produce a large volume that cannot be output with the unit only. Connect the front speakers to the power amplifier.
  • Page 25 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting the TV Connect this unit between a TV and AV component. Connecting this unit with the TV can output the video and audio signals of the AV component to the TV, or play the audio of the TV on this unit.
  • Page 26 Contents Connections Playback Setup ≫ ≫ ≫ ≫ To ARC TV If the TV supports the ARC (Audio Return Channel) function (*), use only the HDMI cable to connect with the TV. Use the ARC-compatible HDMI IN jack of the TV for connection.
  • Page 27 Contents Connections Playback Setup ≫ ≫ ≫ ≫ To Non-ARC TV If the TV does not support the ARC (Audio Return Channel) function (*), connect an HDMI cable and digital optical cable. • If you use a cable set-top box, etc. connected to the input jack of this unit to watch TV (without using a TV’s built-in tuner), connection with a digital optical cable or analog audio cable is not required.
  • Page 28 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting Playback Devices Connecting an AV Component with HDMI Jack Mounted This is a connection example of an AV component equipped with an HDMI jack. When connecting with an AV component that conforms to the CEC (Consumer Electronics Control) standard, you can use the HDMI CEC function (*) that enables linking with input selectors, etc.
  • Page 29 If the turntable has a ground wire, connect it to the GND terminal of this unit. • By connecting an Onkyo component with RI jack to the unit by using an RI cable and an analog audio cable, you can link the unit’s power and input selection and enable operation with this unit’s remote controller.
  • Page 30 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting an AV Component in a Separate Room (Multi-zone Connection) Connecting a TV (ZONE 2) While a disc is played on a Blu-ray Disc player in the main room (where this unit is located), you can play the video and audio of the same Blu-ray Disc player or another AV component on the TV equipped with an HDMI IN jack in a separate room (ZONE 2).
  • Page 31 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting a Pre-main Amplifier (ZONE 2) You can enjoy 2-ch audio in the separate room (ZONE 2) while performing playback in the main room (where this unit is located). Use an analog cable to connect the ZONE 2 LINE OUT jack of this unit and the LINE IN jack of the premain amplifier in the separate room.
  • Page 32 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting Antennas North American models Connect the antenna to this unit, and set up the antenna at the best position for (European listening while receiving radio signals. Attach the indoor FM antenna to the wall models) using push pins or adhesive tape.
  • Page 33 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Network Connection This unit can be connected to the network using a wired LAN or Wi-Fi (wireless LAN). You can enjoy network functions such as Internet radio by network connection. If connection is made by the wired LAN, connect the router and the ETHERNET jack with the LAN cable as shown in the illustration.
  • Page 34 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting External Control Devices IR IN/OUT port When connecting a remote control receiver unit consisting of an IR Receiver, etc. to this unit, operation using the remote controller is possible even if the remote control signal is difficult to reach (due to installation in the cabinet, etc.).
  • Page 35 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting the Power Cord Connect the power cord after all the connections are completed. • This model includes a removable power cord. Be sure to connect the power cord to the AC INLET of the unit first, and then connect it to the outlet. Always disconnect the outlet side first when disconnecting the power cord.
  • Page 36 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playback AV Component Playback BLUETOOTH Playback ® Internet Radio Spotify AirPlay ® DTS Play-Fi ® FlareConnect Playing MQA files USB Storage Device Playing back files on a PC and NAS (Music Server) Play Queue Amazon Music Connecting the Sonos System for Playback...
  • Page 37 Contents Connections Playback Setup ≫ ≫ ≫ ≫ AV Component Playback You can play the audio from AV components, such as Blu-ray disc players through this unit. • When a TV is connected to the HDMI OUT SUB jack, use the "AUDIO Menu" ( p97) to switch between MAIN and SUB.
  • Page 38 If a password is requested, enter "0000". • This unit is displayed as "Onkyo TX-8390 XXXXXX". This display can be p91) or Onkyo Controller changed using the Friendly Name function ( (available on iOS or Android™).
  • Page 39 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Internet Radio By connecting this unit to an Internet-connected network, you can enjoy Internet radio services such as TuneIn Radio. • To play Internet radio services, the network needs to be connected to the Internet. •...
  • Page 40 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Internet Radio Service Menu You can bookmark specific stations, or delete stations that have been bookmarked. The displayed menu varies according to the service being selected. The menu icon is displayed while a station is being played. When only this icon is displayed, pressing ENTER will display the menu on the screen (The operation is also available with MENU).
  • Page 41 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Spotify Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how. Front Panel≫ Rear Panel≫ Remote≫...
  • Page 42 Then, press NET button on the remote controller. Next, click the AirPlay icon in iTunes, select this unit from the displayed devices, and start play of a music file. iPhone Onkyo TX-8390 XXXXXX e.g., iOS 10 Front Panel≫ Rear Panel≫ Remote≫...
  • Page 43 You can also play the music files on a PC with iTunes (Ver. 12.8 or later) Onkyo TX-8390 XXXXXX equipped. Confirm that this unit and the PC are connected to the same network Onkyo XXXXXXXX beforehand. Then, press NET button on the remote controller. Next, click the...
  • Page 44 "Group playback" that plays the same music in separate • To use a music streaming distribution service, user registration may be rooms at home. To enjoy this function, download Onkyo Music Control App required. (available on iOS or Android™).
  • Page 45 ≫ ≫ FlareConnect When downloading Onkyo Controller (available on iOS or Android™) to mobile devices, such as a smartphone and tablet, you can enjoy the group playback that plays the same music on multiple audio products supporting the FlareConnect function. You can play audio from external playback devices connected to each product, music from an Internet radio or network audio service such as a music streaming distribution service, and music in the music library on a mobile device.
  • Page 46 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playing MQA files MQA and the Sound Wave Device are registered trade marks of MQA Limited. © 2016 MQA (Master Quality Authenticated) is an award-winning British technology that delivers the sound of the original master recording. The master MQA file is fully authenticated and is available to stream, download and on CD.
  • Page 47 Contents Connections Playback Setup ≫ ≫ ≫ ≫ USB Storage Device You can play music files stored on a USB storage device. Basic Operations Perform the following procedure when this unit is on. 1. Switch the input on the TV to the input connected to the unit. TV’s REMOTE 2.
  • Page 48 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • To return to the previous screen, press RETURN. • To display an album title, artist name and album art of a file in WAV format, make the folder structure and file names as shown below when saving music files.
  • Page 49 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Device and Supported Format USB Storage Device Requirements WAV (.wav/.WAV): WAV files contain uncompressed PCM digital audio. • This unit can use USB storage devices that comply with the USB mass • Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, storage class standard.
  • Page 50 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playing back files on a PC and NAS (Music Server) Streaming play of music files stored on PCs or NAS devices connected to the same network as this unit is supported. • The network servers supported by this unit are PCs that incorporate players equipped with the server functions such as Windows Media Player 11 or 12, or NASes ®...
  • Page 51 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playing Back Perform the following procedure when this unit is on. 1. Switch the input on the TV to the input connected to the unit. TV’s REMOTE 2. Start the server (Windows Media Player 11, Windows Media Player 12, or ®...
  • Page 52 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 6. Select the target server with the cursors, and press ENTER to display the Player 12, it must be configured beforehand. items list screen. Setting PC • This unit cannot access pictures and videos stored on servers. 1.
  • Page 53 Contents Connections Playback Setup ≫ ≫ ≫ ≫ – It is playing a music file on a USB storage device. • Depending on the version of Windows Media Player, the names of items to ® select may differ from the above description. ‰...
  • Page 54 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Supported Audio Formats This unit supports the following music file formats. Remote play of FLAC and Apple Lossless (.m4a/.mp4/.M4A/.MP4): DSD is not supported. • Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz •...
  • Page 55 Or, select the "NET" input, and tap the "USB" icon or "Music Server" icon. (Depending on the model, the icon names may be different.) When downloading Onkyo Controller (available on iOS or Android™) to mobile devices, such as a smartphone and tablet, you can save your favorite playlist...
  • Page 56 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • If there are no tracks on the Play Queue list, only "Play Now " is 3. To delete a track, slide the track to the left until the trash icon changes to " ".
  • Page 57 Registering this unit with Amazon Music allows you to enjoy the music distribution service provided by Amazon. You can register this unit on the screen of Onkyo Controller by downloading Onkyo Controller (available on iOS or Android™) to mobile devices such as a smartphone and tablet.
  • Page 58 Contents Connections Playback Setup ≫ ≫ ≫ ≫ selector on the remote controller to display the network menu, and select "Amazon Music" from the menu. Front Panel≫ Rear Panel≫ Remote≫...
  • Page 59 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting the Sonos System for Playback Setting Up Connecting this unit and Sonos Connect allows you to send the music or music sources on the Sonos App to this unit. Through Sonos Connect, you can play this unit with the same group of another Sonos device on the network or can A setup is required to play Sonos on this unit.
  • Page 60 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playing Sonos on This Unit 1. Select desired tracks using Sonos App and send the tracks to the room where this unit is located (or to the group). It is recommended to give an easy-to- remember name to the combination of this unit and Sonos Connect, such as TV Room or Living Room where this unit is located.
  • Page 61 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Listening To the Radio You can receive AM (North American models)/FM/DAB (European models) radio stations on this unit with the built-in tuner. Listening To the AM/FM Radio (AM: North American models only) Tuning into a Radio Station Perform the following procedure when this unit is on.
  • Page 62 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Using RDS (European models) When FM broadcasts reception is poor: Perform the procedure for "Tuning Manually" ( p62). Note that if you tune manually, the reception for FM RDS stands for Radio Data System, and is a method of transmitting data in FM broadcasts will be monaural rather than stereo, irrespective of the sensitivity of radio signals.
  • Page 63 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • If no stations are found, the message "Not Found" is displayed. • Unusual characters may be displayed when the unit receives unsupported characters. This is not a malfunction. Also, if the signal from a station is weak, information may not be displayed.
  • Page 64 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Listening to DAB Digital Radio (European models only) Tuning into a Radio Station Perform the following procedure when this unit is on. 1. Press TUNER repeatedly to select "DAB". • The very first time you select DAB, the Auto Tuning function automatically scans the DAB Band 3 for the multiplexes (i.e., stations) available in your area.
  • Page 65 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Changing the order stations are displayed You can sort the available stations alphabetically or by multiplex. 1. Press MODE repeatedly to set the method for sorting the display order from the following. Alphabet (default setting) : Sort stations alphabetically.
  • Page 66 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Presetting a Radio Station „ Registration Procedure You can preset up to 40* of your favorite radio stations. *North American models: AM and FM stations European models: FM and DAB stations After tuning in to the radio station you want to register, perform the following procedure.
  • Page 67 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Selecting a Preset Radio Station 1. Press TUNER. 2. Press the cursors to select a preset number. „ Deleting a Preset Radio Station 1. Press TUNER. 2. Press the cursors to select the preset number to delete. 3.
  • Page 68 "BLUETOOTH". You cannot select different stations of DAB (European models)/AM (North American models)/FM broadcasts for the main room and separate room. Using Onkyo Controller is convenient for operations of multi-zone playback. You can use it on mobile devices, such as a smartphone and tablet to which Onkyo Controller (available on iOS or Android™) has been downloaded.
  • Page 69 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playing Back When operating with the remote controller, perform the following procedure when the unit is on. 1. Press REMOTE MODE ZONE 2. • The remote controller switches to the mode for controlling ZONE 2. 2.
  • Page 70 Contents Connections Playback Setup ≫ ≫ ≫ ≫ To return the remote controller to main room control mode: Press REMOTE MODE MAIN on the remote controller. Front Panel≫ Rear Panel≫ Remote≫...
  • Page 71 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Convenience functions Displaying Your Favorite Video on TV While Playing Music While listening to the music from a CD or BLUETOOTH-enabled device, you can display video on TV from an AV component such as a Blu-ray Disc player. TV’s REMOTE •...
  • Page 72 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting the video source to be displayed on TV beforehand: When playing the audio of "TUNER", "NET" and "BLUETOOTH", you can set the input selector to be displayed on TV beforehand using "Video Select" ( p88) on the Setup Menu.
  • Page 73 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Using MY INPUT Registration You can register a variety of settings ( p74), such as the current input selection or listening mode, in the 4 MY INPUT presets, and then recall these easily with the MY INPUT dial.
  • Page 74 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Settings that can be registered The following settings can be registered with MY INPUT. – Input selector (Network service or DAB (European models)/AM (North American models)/FM radio stations can also be registered.) –...
  • Page 75 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Sleep Timer You can allow the unit to enter standby automatically when the specified time has elapsed. Press the SLEEP button on the remote controller, and select any of "30 min", "60 min" and "90 min". "Off": The unit does not automatically enter standby mode.
  • Page 76 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Inputting Characters You can input characters or symbols on the keyboard displayed on the TV screen • Select "A/a" to switch between upper and lower cases. (Can also be switched such as when inputting a password for Wi-Fi Setup ( p90) or naming a with the MODE button on the remote controller.) preset radio station (...
  • Page 77 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Switching the HDMI 4K Signal Format Input and Output by this Unit When the AV Component connected to this unit, such as a TV or player, and the Enhanced HDMI cable (*) supports the high-definition 4K signal formats (4K 60p 4:4:4, 4:2:2 and 4K 60p 4:2:0 10bit), switch the setting value from "Standard"...
  • Page 78 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setup Menu Menu list You can configure advanced settings to have a more enjoyable experience with this unit. For operation details, refer to "Menu operations" ( p80) . 1. Input/Output 1. TV Out / OSD Make settings for TV output and On-Screen Displays (OSD) that appear on the TV.
  • Page 79 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 6. Multi Zone 1. Remote Play Zone Change the settings for remote play. 7. Miscellaneous 1. Tuner Change the settings for Tuner. 2. Firmware Update Change the settings for Firmware Update. 3. Initial Setup Make the initial setup from the setup menu.
  • Page 80 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Menu operations Use the on-screen displays (OSD) that appear on the TV to make the settings. Press SETUP on the remote controller to display the Setup menu. Setup 1. Input/Output Assign 1. TV Out / OSD 2.
  • Page 81 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 1. Input/Output Assign Setting Item Default Value Setting Details Zone 2 HDMI Not Use Make the setting when you output to the Zone 2 TV „ 1. TV Out / OSD connected to the HDMI OUT ZONE 2/SUB jack. "Use": Enable this function Make settings for TV output and On-Screen Displays (OSD) that appear on the "Not Use": Disable this function...
  • Page 82 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 2. HDMI Input Setting Item Default Value Setting Details Mini Player OSD Always On You can display on the TV the images from another Change input assignment between the input selectors and HDMI IN jacks. input selected last while playing the audio from NET or BLUETOOTH input.
  • Page 83 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 3. Digital Audio Input Setting Item Default Value Setting Details PHONO "HDMI 1 (HDCP 2.3)" to "HDMI 6 (HDCP 2.3)": Change input assignment between the input selectors and DIGITAL IN COAXIAL/ Assign a desired HDMI IN jack to the PHONO OPTICAL jacks.
  • Page 84 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 4. Analog Audio Input Setting Item Default Value Setting Details Listening Mode Displays the listening mode (Stereo, Pure Audio, Change input assignment between the input selectors and AUDIO IN jacks. If you Direct) that has been set.
  • Page 85 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 2. Speaker „ 2. Crossover Change the settings of crossover frequencies. „ 1. Configuration Setting Item Default Value Setting Details Change the settings of connection environment of the speakers. Front 100 Hz Select the crossover frequency from "40 Hz"...
  • Page 86 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 3. Distance „ 5. Equalizer Settings Set the distance from each speaker to the listening position. You can adjust the output volume of the range for each connected speaker. Adjust the volume of different sound ranges for each speaker. You can set three Setting Item Default Value Setting Details...
  • Page 87 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 3. Audio Adjust „ 2. Name Edit Set an easy name for each input. The set name appears on the main unit’s „ 1. Volume display. Select the input selector to make the setting. Change the Volume settings.
  • Page 88 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Audio Select „ Video Select Select the priority for input selection when multiple audio sources are connected When "TUNER", "NET", or "BLUETOOTH" input is selected, you can set the input to one input selector, for example, connections to both the "BD/DVD" HDMI IN from which video is displayed on the TV.
  • Page 89 • When this function is set to "On", the power controller or the Onkyo Controller even in the consumption in standby state increases, standby mode. however, the increase in power consumption is "Auto", "Auto (Eco)": Select either of the settings...
  • Page 90 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 2. Network Setting Item Default Value Setting Details Audio TV Out You can enjoy audio through the speakers of the Change the settings of the Network function. TV while this unit is on. •...
  • Page 91 Displays/Sets the proxy server port number when AirPlay Device Onkyo Change the model name of this unit which is you input "Proxy URL". Name TX-8390 displayed on the AirPlay-connected device to an XXXXXX easily recognized name. Friendly Name Onkyo Change the model name of this unit which is 1.
  • Page 92 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 3. Bluetooth Setting Item Default Value Setting Details AirPlay Password You can set a password of up to 31 digits so that Change the settings for the Bluetooth function. only users that have input can use AirPlay ®...
  • Page 93 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting Item Default Value Setting Details Setting Item Default Value Setting Details Auto Standby On/Off This setting allows the unit to enter standby mode Pairing You can initialize the pairing information stored on automatically after 20 minutes of inactivity without Information this unit.
  • Page 94 Setting Item Default Value Setting Details an application such as Onkyo Controller that can Input Selector Select the input selector to which the Sonos control this unit. Connect is connected.
  • Page 95 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 7. Miscellaneous Setting Item Default Value Setting Details Preset Volume Last You can set the volume beforehand for playing „ 1. Tuner back the Sonos Connect. Select a value from "Last" (Volume level before entering standby Change the settings for Tuner.
  • Page 96 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 2. Firmware Update „ 5. Factory Reset Change the settings for Firmware Update. All the settings are restored to factory defaults. Setting Item Default Value Setting Details Setting Item Default Value Setting Details Update Notice Enable...
  • Page 97 Contents Connections Playback Setup ≫ ≫ ≫ ≫ AUDIO Menu Menu operations You can quickly adjust the settings you frequently use, such as tone adjustments, etc. You can make the settings on the TV screen during playback. Press AUDIO on the remote controller to display the AUDIO Menu.
  • Page 98 Contents Connections Playback Setup ≫ ≫ ≫ ≫ of lossy compressed files such as MP3 will be improved. The setting can be set for each input. This works in signals whose sampling frequencies are 48 kHz or less. • It cannot be set if the listening mode is Pure Audio or Direct. „...
  • Page 99 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Web Setup Menu operations You can make the settings for the network function of this unit using an Internet address of this unit. browser on a PC, smartphone, etc. Network Connection: You can select a network connection method. If you select 1.
  • Page 100 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Initial Setup with Auto Start-up Wizard Operations When you turn the unit on for the first time after purchase, the Initial Setup screen is automatically displayed on the TV to allow you to make settings required for TV’s REMOTE startup using simple operations following on-screen guidance.
  • Page 101 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 1. Speaker Setup the speaker terminals when connecting. 1. Place the supplied speaker setup microphone at the listening position, and 1. Make settings for connected speakers and external output. connect it to the SETUP MIC jack on the main unit. Speaker Setup Subwoofer <...
  • Page 102 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Keyboard Input confirmation screen asking you to agree to the privacy statement is displayed during network setting, so select "Accept" if you agree and then press ENTER. To switch between upper and lower cases, select "A/a" on the screen, and press 2.

  • Page 103: Table Of Contents

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Troubleshooting „ BLUETOOTH function „ Network function Before starting the procedure „ USB storage device Problems may be solved by simply turning the power on/off or disconnecting/ „ Wireless LAN Network connecting the power cord, which is easier than working on the connection, setting and operating procedure.

  • Page 104: When The Unit Is Operating Erratically

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ When the unit is operating erratically ‰ Try restarting the unit Restarting this unit may solve the problem. After turning the unit to standby mode, press and hold the ON/STANDBY button of the main unit for at least 5 seconds, and then restart the unit.

  • Page 105: (This Resets The Unit Settings To The Default)

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ ‰ Resetting the unit (this resets the unit settings to the default) If the restart of the unit does not solve the problem, reset the unit, and restore all the settings to the factory default at the time of purchase. This may solve the problem. If the unit is reset, your settings are restored to the default values.

  • Page 106: Troubleshooting

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Troubleshooting „ Power ‰ When the power is turned on, "AMP Diag Mode" appears on the display of the main unit. • The protection circuit function may have operated. If the unit suddenly enters the standby state and "AMP Diag Mode" appears on the display of the main unit when the power is turned on again, this function is diagnosing whether or not the main unit is malfunctioning or there is an abnormality with the speaker cable connection.
  • Page 107 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ‰ No sound from the TV • Change the input selector on this unit to the position of the terminal to which the TV is connected. • If the TV does not support the ARC function, along with the connection by an HDMI cable, connect the TV with this unit using a digital optical p27) cable.

  • Page 108: X84; Video

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ ‰ Noise can be heard • Using cable ties to bundle audio pin cables, power cords, speaker cables, etc. may degrade the audio performance. Do not bundle the cords. • An audio cable may be picking up interference. Change the position of the cables. ‰...

  • Page 109: X84; Linked Operation

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ ‰ No image from a device connected to HDMI IN jack • To display video from the connected player on the TV while the unit is in standby, you need to enable "5. Hardware" - "HDMI" - "HDMI Standby p89) Through"...

  • Page 110: X84; Bluetooth Function

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ BLUETOOTH function • Unplug and plug the power cord of the unit, or turn off and on the BLUETOOTH-enabled device. Restart of the BLUETOOTH-enabled device may be effective. • BLUETOOTH-enabled devices must support the A2DP profile. •...

  • Page 111: X84; Usb Storage Device

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ ‰ Cannot access the Internet radio • In the case the service provider has terminated the service, the network service or contents may not be used on this unit. • Check if your modem and router are properly connected, and they are both turned on. •...

  • Page 112: X84; Wireless Lan Network

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Wireless LAN Network • Unplug and plug the power cords of this unit and the wireless LAN router, check the power-on status of the wireless LAN router, or restart the wireless LAN router. Check the following if the problem persists after you have confirmed the above.

  • Page 113: X84; Multi-Zone Function

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Multi-zone function ‰ Cannot ZONE-output the audio of externally connected AV components • To output audio from an externally connected AV component to ZONE 2, connect it to any of HDMI IN1 to IN3 jacks. If the AV component is not equipped with an HDMI jack, use a digital coaxial cable, digital optical cable or analog audio cable.
  • Page 114 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ‰ The measurement results of AccuEQ Room Calibration show different distances to the speakers from the actual ones • Depending on the speakers you are using, some errors may occur in the measurement results. If this is the case, make the settings in "2. p86) Speaker"...
  • Page 115 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Reducing the Power Consumption in Standby State When the following functions are enabled, the power consumption in standby state increases. To reduce the power consumption in standby state, check each setting and set the functions to "Off". –...
  • Page 116 HDCP standards. We have confirmed the operations of the following devices. (As of January 2019) Supported Audio Formats Toshiba brand televisions; Sharp brand televisions; Onkyo and Integra brand RIHD-compatible players; Toshiba brand players and recorders; Sharp brand 2 ch linear PCM: players and recorders (when used with a Sharp brand television) 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 16/20/24 bit...
  • Page 117 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Supported resolutions HDMI IN1 to IN6: • Copyright protection technology: HDCP1.4/2.2/2.3 • Color space (Color Depth): – 720×480i 60 Hz, 720×576i 50 Hz, 720×480p 60 Hz, 720×576p 50 Hz, 1920×1080i 50/60 Hz, 1280×720p 24/25/30/50/60 Hz, 1680×720p 24/25/30/50/60 Hz, 1920×1080p 24/25/30/50/60 Hz, 2560×1080p 24/25/30/50/60 Hz, 4K (3840×2160p) 24/25/30 Hz, 4K SMPTE (4096×2160p) 24/25/30 Hz : RGB/YCbCr4:4:4 (8/10/12 bit), YCbCr4:2:2 (12...
  • Page 118 Contents Connections Playback Setup ≫ ≫ ≫ ≫ General Specifications „ Amplifier Section Signal to Noise Ratio 106 dB (IHF-A, LINE IN, SP OUT) Rated Output Power (FTC) (North American) 80 dB (IHF-A, PHONO IN, SP OUT) With 8 ohm loads, both channels driven, from 20-20,000 Hz; rated 135 Speaker Impedance watts per channel minimum RMS power, with no more than 0.08% total A,B: 4 Ω...
  • Page 119 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Network Section 0.15 W (Full Standby mode) 2.0 W (Network Standby (wired)) Ethernet LAN 2.0 W (Network Standby (wireless)) 10BASE-T/100BASE-TX 2.0 W (Bluetooth Wakeup) Wireless LAN 0.15 W (HDMI CEC) IEEE 802.11 a/b/g/n/ac standard * 3.0 W (Equipment with HiNA functionality Standby mode, Network (Wi-Fi standard)
  • Page 120 Contents Connections Playback Setup ≫ ≫ ≫ ≫ HDCP version IR IN: 1 IR OUT: 1 Maximum Video Resolution Specifications and features are subject to change without notice. 4K 60 Hz (YCbCr 4:4:4) „ Supported input resolutions HDMI input 4K, 1080p/24, 1080p, 1080i, 720p, 480p/576p •...
  • Page 121 SN 29403724_EN (C) Copyright 2019 Onkyo & Pioneer Corporation Japan. All rights reserved. http://www.onkyo.com/privacy/ F1908-0...

This manual is also suitable for:

Tx-8390-bTx-8390-s243990243989

Table of Contents