This Happens, Unplug The Power Cord From The Wall Outlet, Wait At Least - Onkyo TX-8390 Instruction Manual

What's in the box
Contents Connections
≫
1. Main unit (1)
2. Remote controller (RC-975S) (1), Batteries (AAA/R03) (2)
3. Speaker setup microphone (1)
• Used during Initial Setup.
4. Indoor FM antenna (For North American models only) (1)
5. AM loop antenna (For North American models only) (1)
6. DAB/FM antenna (For European models only) (1)
7. Power cord (1)
• Quick Start Guide (1)
* This is an online user manual. This is not supplied with the product.
• Connect speakers with an impedance of 4 Ω to 16 Ω. When using the 2.1
Channel System (A+B) (
and B, connect speakers with 8 Ω to 16 Ω impedance.
• The power cord must be connected only after all other connections are
completed.
• We will not accept any responsibility for damage arising from the connection
with equipment manufactured by other companies.
• Network services and content that can be used may no longer be available
if new functions are added by updating firmware or the service providers
terminate their services. Also, available services may differ depending on your
area.
• Details on the firmware update will be posted on our website and through
other means at a later date.
• The illustrations in this manual use those of North American models unless
otherwise mentioned.
• Specifications and appearance are subject to change without prior notice.
5
Front Panel≫ Rear Panel≫ Remote≫
Playback
≫ ≫
p22) for simultaneous output from SPEAKER A
Setup
≫