Onkyo TX-8390 Instruction Manual page 30

Connecting an AV Component in a Separate Room (Multi-zone Connection)
Connecting a TV (ZONE 2)
a
a HDMI cable
Contents Connections
≫
While a disc is played on a Blu-ray Disc player in the main room (where this unit
is located), you can play the video and audio of the same Blu-ray Disc player or
another AV component on the TV equipped with an HDMI IN jack in a separate
room (ZONE 2). Note that only the devices connected to the HDMI IN1 to IN3
jacks can be played on the TV in the separate room.
• Audio from an externally connected AV component can be output only when
the audio is 2ch PCM audio signal. Also, the audio output of the AV component
may need to be changed to the PCM output.
Setup
• When video and audio via HDMI input are output to ZONE 2, set "1. Input/
Output Assign" - "TV Out / OSD" - "Zone 2 HDMI" (
Setup menu.
TV
30
Playback
≫
Front Panel≫ Rear Panel≫ Remote≫
Setup
≫ ≫
p81) to "Use" on the