Appendix 3 Print And Paper Out Position; Appendix 4 Communication Interface; Appendix 4.1 Serial Interface - AMT Datasouth Fastmark Z5DT Series User Manual

Appendix 3 print and paper out position

Caution:
 To take marked label/paper for example, the figure above explains the print and paper out position;
 Discontinuous label/paper locates by the front edge of the mark;
 Refer to to adjust the print and label/paper out position.
3.5

Appendix 4 communication interface

Appendix 4.1 serial interface

Interface signal
1)
Wiring diagram
2)
PC
TXD
RXD
CTS
RTS
SG
Caution:
 The following connection method can be used, which only needs 3 wires. This method applies to small
data amount or XON/XOFF flow control:
PC
TXD
RXD
SG
Figure appendix 3-1
Pin Signal name Signal direction
1 None
2 RXD
3 TXD
4 DTR
5 SG
6 DSR
7 RTS
8 CTS
9 FG
Table appendix 4.1-1 printer signal and status
Printer
RXD
TXD
RTS
CTS
SG
Printer
RXD
TXD
SG
Function
Input Data input
Output Data output
Output Data terminal ready
Signal ground
－
Input Data device ready
Output Request transmission
Input Allow transmission
Frame ground
－
- 24 -
Z5 User's Guide
DT