Appendix; Appendix 1 Technical Specification; Appendix 1.1 Main Technical Specifications - AMT Datasouth Fastmark Z5DT Series User Manual

6 Appendix

Appendix 1 technical specification

Appendix 1.1 main technical specifications

Printing
Media
Character
Barcode
Graphics
Item
Resolution
Print method
Print width (Max.)
Print speed (Max.)
CPU
Memory
Print head temperature
detection
Print head position
detection
Paper mark detection
Paper existence detection
Communication interface
Media type
Roll OD (Max.)
Roll width (Max.)
Roll ID
Media out mode
Character
enlargement/rotation
Character set
Fastmark Z5
203DPI
Thermal
4.09" (104mm)
6 ips (152mm/s)
32bit RISC microprocessor
FLASH: 4MB
SDRAM: 64MB
Extended FLASH: it can be extended to 8MB.
Thermal resistor
Micro switch
Photoelectric sensor
Photoelectric sensor
USB interface or USB interface + optional interface;
Optional interface: serial interface, CENTRONICS parallel interface,
Ethernet interface and WLAN interface.
Continuous paper, label, marked label/paper, etc.
5.0" (127mm)
4.72": (120mm)
0.5" (12.5mm) / 1.0" (25mm)
Tear off, peel-off, etc.
Support four types of rotation printing (0°, 90°, 180°, 270°)
Bitmap fonts can be enlarged up to 10 times.
Vector fonts can be zoomed without scale.
7 bitmap fonts and 1 vector font are built-in.
User-defined bitmap and vector fonts can be downloaded into the
printer.
- 20 -
Z5 User's Guide
DT
parameter
DT