2. 2.
Preparation for installation
Preparation
for installation
Problem analysis
Problem analysis
Dust, foreign substances, rain water, industrial water and
Dust, foreign substances, rain water, industrial water and
dew got inside of the indoor unit. Because it was left with
dew got inside of the indoor unit. Because it was left with
all the packaging removed while installation was put on
all the packaging removed while installation was put on
hold.
hold.
Consequence
Consequence
Dust and other foreign substances will get inside and
Dust and other foreign substances will
cause pipe blockage or other malfunctions.
cause pipe blockage or other
Standard procedure
Standard procedure
After indoor unit arrives in the site, do not remove the
After indoor unit arrives in the site, do not remove the
packaging until it is being installed. If the installation was
packaging until it is being installed. If the installation was
stopped or put on hold for any reasons, wrap the indoor
stopped or put on hold for any reasons, wrap
units for protection.
units for protection.
Proper method
Proper method
Protect the indoor unit by wrapping it.
Protect the indoor unit by wrapping it.
36
36
get inside and
malfunctions.
the indoor