Problem analysis
Problem analysis
Product is left alone in
Product is left alone in the open site. If the ground gets
wet with water after rain or due to other reasons, it will
wet with water after rain or due to other reasons, it will
cause bad effect on the product.
cause bad effect on the product.
Consequence
Consequence
If the indoor unit products gets soaked, water will ll
If the indoor unit products gets soaked, water wi
damage the packaging first and then it
damage the packaging first and then it may get into the
indoor unit and damage the electrical parts.
indoor unit and damage the electrical parts.
Such damage may cause critical safety trouble.
Such damage may cause critical safety trouble.
Standard procedure
Standard procedure
When
When
handling
handling
the product in the site, you must store
the product in the
them properly. Do not put the product on the ground.
them properly. Do not put the product on the ground.
You must use some sort of a support, with certain
You must use some sort of a support, with certain
height, underneath the product to prevent the product
height, underneath the product to prevent the product
from getting soaked in water in case of water floods.
from getting soaked in water in case
Proper method
Proper method
a support with at least 200mm(8inch) high
a support with at
Utilize
Utilize
above the ground and put the product on top of
above the ground and put the product on top of
those supporting structure.
those supporting structure.
31
31
Installation guide
Installation guide
the open site. If the ground gets
may get into the
site, you must store
of water floods.
least 200mm(8inch) high