5) Connecting the power terminal
5) Connecting the power terminal
(1) Use solderless ring terminal to connect cable and terminal block.
(1) Use solderless ring terminal to connect cable and terminal block.
(2) Install the cable according to a blueprint.
(2) Install the cable according to a blueprint.
(3) Install the wire box, with uncovered insulation tube, to the product.
(3) Install the wire box, wi
(4) During the installation in the site, make sure the wires and pipes do not contact each other
(4) During the installation in the site, make sure the wires and pipes do not contact each other
because the vibration of compressor and high temperature pipe can make damage
because the vibration of compressor and
Good
Good
th uncovered insulation tube, to the product.
130
130
Bad
Bad
high temperature pipe can make damage to wiring.
Installation guide
Installation guide
to wiring.