Table of Contents
Advertisement
•
Make sure that Bluetooth
device.
•
Switch off the product and then switch it on again
and try again. Refer to number 1-4 above.
4.3 How to use Autocheck 3
The program's main functions are grouped in a number
of menus.
Home
•
Auto test
•
Manual test
•
Firmware
•
Actions
•
•
Log book
Documents
•
Customers
•
Help
•
Settings
•
4.3.1 Home
When the product is connected to Autocheck an
overview is presented in the
Recommended actions are also shown, for example
recommended firmware updates.
4.3.2 Auto test
Auto test is suitable to use for a fast and overall status of
Auto test menu you can select or
the product. In the
deselect tests. All tests run in a sequence after you push
Start Auto test . During the tests there are animations
guiding you what to do.
Auto test the results are presented in a list.
After the
When clicking on a test there is more information
presented on the screen. It is also possible to print a
report of the test result.
4.3.3 Manual test
Manual test you select, start and stop
When using the
the different tests by yourself. The result is shown live
on the screen and there are no test reports available.
Manual test is appropriate to use when you want to test
a specific component and allow it to work for a certain
period.
4.3.4 Firmware
Firmware menu Autocheck updates the product
In the
firmware if necessary.
CAUTION: Always let Autocheck complete a
started programming process. An interrupted
programming can block the main circuit board.
4.3.5 Actions
Actions menu shows:
The
Reset : Contains reset functions, for example Reset
•
charge cycles counter and Reset period time . Reset
10 - Autocheck service tool
®
is enabled on your tablet/
Home menu.
charge cycles counter should be done when the
product has a new battery.
be done before the product is returned to the
customer (if there is a need to create a new loop
signal between the product and the charging
station).
Unit replacement : Has the functionality to set the
•
product serial number if the main circuit board is
exchanged.
Advanced mower settings : Contains additional
•
Demo mode and Override loop
functions like
detection . It is also possible to get the Security code
from the product.
4.3.6 Log book
Log book contains the Fault memory where, for
The
example, the product's error codes can be found.
4.3.7 Documents
When a product is connected to Autocheck, only the
relevant technical documentation for that model is
shown. It is however possible to uncheck the box for the
connected product and search for all available
documents in Autocheck, for example spare parts lists,
service bulletins, workshop manuals and operator's
manuals.
4.3.8 Customers
In the customer's menu a list of all the customers and
their products is available. The list is only saved locally.
It is possible to import, export and merge customer lists.
This can be used if you have a number of computers in
your organization.
4.3.9 Help
Here you can find more information about how to use
Autocheck. There are also Frequently Asked Questions
(FAQ), instructional videos and release notes.
4.3.10 Settings
Here you can enter dealer information, change
language, set date format and unit format. To apply the
new language or time format Autocheck must to be
restarted.
4.4 Programming a new main circuit board
If the main circuit board is replaced, the new main circuit
board must be programmed. The main circuit board
includes information about the product's serial number.
Note: A new main circuit board may for safety reasons
only be assigned one serial number which is never
changed. It is therefore very important that the new main
board gets the correct serial number.
There are 3 options when programming a new main
circuit board:
•
Select product from the Log book
Reset period time should
1595 - 001 - 01.02.2021
Hide quick links:
Advertisement
Table of Contents
