Sensorcontrol/Lawnsense; Safe Operation In Slopes; New Loop Signal - Husqvarna GARDENA SILENO MINIMO Workshop Manual

when STOP is pressed. How to do the test is described
in the Operator's manual.

3.9 SensorControl/LawnSense

®
Note: SensorControl for GARDENA and LawnSense
®
for Flymo are the same function.
When SensorControl/LawnSense is activated, the
product automatically adjust its mowing times based on
how fast the grass grows. This is decided by
continuously measuring the blade disc resistance and
comparing that to a mean value. If the resistance is
higher than the mean value, the product is allowed to
work for a longer time, and the other way around. The
mean value is continuously updated and whenever the
mower has collected enough data, the weather timer will
start affect the mowing time.
Note: The mean value will be reset if the settings are
reset.
The SensorControl/LawnSense does not make the
product work more than the timer settings, only less.
The product will always perform at least one mowing
cycle per day, only after that the mowing time is reduced
by the SensorControl/LawnSense.

3.10 Safe operation in slopes

The product adjusts its operation automatically based on
factors such as the slope angle and travel direction.
If the slope is too steep, the product moves rearwards
and turns to try to find a less steep slope. If after 2
attempts the product cannot find a less steep slope, it
stops and the product indicates that the stop is caused
by a steep incline.
Slopes that exceed the specified maximum inclination
can normally only be reached in very favourable
conditions. Accessibility on steeper slopes than
specified cannot be guaranteed.

3.11 New loop signal

In rare cases, there may be a reason to change the loop
signal. For example, if two nearby installations have the
same loop signal they can interfere with each other.
1. Select a new loop signal via the app.
Note: A new loop signal has to be generated when the
product returns to its ordinary charging station, for
example after service if a charging station other than the
Actions on page
customer's has been used. Refer to
10 .
8 - Product and installation 1595 - 001 - 01.02.2021