Autocheck Service Tool; Installation And Login; Connect To The Product; How To Use Autocheck 3 - Husqvarna Automower 435X AWD Workshop Manual

Autocheck 3 is a PC tool developed for the service of
the robotic lawn mowers from Husqvarna Group. It is a
tool for troubleshooting as well as a database of sold
products and service history. Autocheck also includes
technical documentation and service bulletins.
Autocheck 3 supports all G3 (Generation 3) and G4
(Generation 4) products. Autocheck EXP is still
applicable for G2 (Generation 2).
The product is connected to the computer using short-
®
range Bluetooth .

4.1 Installation and login

Autocheck 3 supports Windows OS 10 and later.
Compatibility with other operating systems cannot be
®
guaranteed. Bluetooth needs to be version 4.0 or later.
4.1.1 Getting log in credentials
The log-in credentials determine the set of capabilities
available within Autocheck 3.
To get Autocheck log-in credentials, either contact your
local sales support, or order Autocheck through the
Dealer Portal (requires access).
Note: Distributors can request access to Autocheck
through the Husqvarna IT service portal. Access to
Husqvarna IT service portal can be ordered through the
Husqvarna sales representative.
4.1.2 Installing Autocheck 3
Autocheck 3 is available for downloading from the
Husqvarna Support site: https://
supportsites.husqvarnagroup.com/
AFTER SALES – Service tools – Autocheck 3
1. Select
– SW installation .
2. Download Autocheck 3 according to the instructions
on the Support site.
3. Run the installation file.
When the installation is complete, an Autocheck 3
shortcut is created on the desktop.
Contact your regional Husqvarna group contact person if
you lack access to the Support site.
4.1.3 Log in to Autocheck 3
1. Double-click on the Autocheck icon.
2. Enter your username and password, refer to
log in credentials on page 9 .
3. Choose country and select
Note: At the first log-in after installation, Autocheck
requires access to internet for user and password
validation.
1061 - 001 -

4 Autocheck service tool

Getting
OK .

4.2 Connect to the product

1. Start Autocheck on your computer.
2. Push the jog wheel for 3 seconds to switch the
product on. The product is now pairable through
®
Bluetooth for 3 minutes.
3. The product automatically appears in the list of
found devices.
4. Press the Connect button for the intended device.
The connection between Autocheck and the product is
established automatically. The connection is confirmed
on the Autocheck Home screen.
Connected mower: None is displayed in
If the text
Autocheck, contact with the product has not been
established:
• Make sure that Bluetooth
device.
• Switch off the product and then switch it on again.
Refer to number 1-4 above.

4.3 How to use Autocheck 3

The program's main functions are grouped in a number
of menus.
Home
•
Auto test
•
®
is enabled on your tablet/
Autocheck service tool - 9