Demo Mode; To Recover The Pin Code - Husqvarna GARDENA SILENO MINIMO Workshop Manual

Select product from the Log book and the serial
number and operating data is transferred
automatically to the new main circuit board. This
requires that the product previously has been
connected to Autocheck.
• Enter the serial number manually in Autocheck
If the product never was connected to Autocheck,
the serial number must be entered manually in the
Actions - Unit replacement menu. It is then very
important to enter the correct serial number.
• Use Service mode
If the main circuit board is replaced when
troubleshooting, and you are not sure if the main
circuit board will be kept in the product, it is possible
to temporarily skip to enter the serial number and
use the main circuit board in a so-called
mode . Only Autocheck can be used to control the
product in service mode.
WARNING: Do not return the product to the
customer in

4.5 Demo mode

Demo mode is used for installations in shops or
exhibitions. The blade disc does not rotate and the
product alternates between short periods of operation,
docking and charging. Demo mode can be enabled and
disabled in Autocheck or with the keypad.
WARNING: Do not have blades installed when
the product operates for demonstration in public
areas such as shops and exhibitions.
4.5.1 To set the Demo mode using the keypad
1. Push the STOP button.
®
2. For GARDENA : Push the Start button and the
Start/Schedule button simultaneously for 3 seconds.
®
3. For Flymo : Push the GO button and the GO/
Schedule button simultaneously for 3 seconds.

4.6 To recover the PIN code

Actions > Advanced mower
1. In Autocheck select
settings > Get security code to upload the security
code to the cloud.
2. Speak to the local sales support and tell them the
serial number. They can then identify the correct PIN
code.
Note: The PIN code will be with numbers 1-4 where
1 is the ON/OFF button, 2 is the Start/Schedule
button, 3 is the Start button and 4 is the Park button.
1595 - 001 - 01.02.2021
Service
Service mode .
Autocheck service tool - 11