Table of Contents
Advertisement
(2) Switch to Conventional Cruise Control.
Press and hold the
onds or longer to switch from Adaptive Cruise Control to Conventional Cruise Control. A
notification sounds 1 short beep.
At this time, the following distance setting indicator on the EyeSight display area of the
combination meter display turns off and
displayed.
To set the ready status:
Conventional Cruise Control can be acti-
vated when all of the following conditions
are met and
displayed on the EyeSight display area.
- All doors (except the trunk) are closed.
- The driver's seatbelt is fastened.
- The electronic parking brake is not
engaged. The electronic parking brake
indicator light is turned off.
- The select lever is in the
and the paddle shift is not operated.
- The brake pedal is not depressed.
- The road is not on a steep slope.
- The steering wheel has not been turned significantly in either direction.
- The vehicle speed is between approximately 20 mph (30 km/h) and 90 mph
(145 km/h)*.
*: For Mexico models, approximately 30 km/h and 200 km/h.
(Following distance setting) switch for approximately 2 sec-
S03496
(READY indicator) is
position,
D
Conventional Cruise Control
(Conventional Cruise Control indicator) is
Conven-
tional
Cruise
Control
indicator
READY
indicator
MPG
MPH
miles
S03570
MPG
MPH
miles
S04002
99
Advertisement
Table of Contents
