Table of Contents
Advertisement
• After stopping with secondary braking, in the following cases, brake control
will be released and the electronic parking brake will be applied.
(For details about how to release the electronic parking brake, refer to the
Owner's Manual for your vehicle.)
- Approximately 2 minutes have elapsed since stopping and the brake pedal
is not depressed.
- Any door (except the trunk) is opened.
- Vehicle Dynamics Control is switched to the OFF mode.
Refer to the vehicle Owner's Manual for details.
- The driver's seatbelt is unfastened.
- The EyeSight system has stopped temporarily.
• Neither first braking nor secondary braking will operate in the following cases.
- The vehicle speed is approximately 1 mph (1 km/h) or less (When the select
lever is in the
N
km/h) or less) or 100 mph (160 km/h)* or more.
*: For Mexico models, 200 km/h.
- Vehicle Dynamics Control is active.
• If the system detects the brake lights of the vehicle in front, your vehicle will
start decelerating earlier than if it does not.
• There are some cases where the first braking is applied for a longer period of
time. One of the reasons for this is due to a large speed difference with an
obstacle in front. In those cases, stronger or weaker braking control may be
activated.
position and your vehicle speed is approximately 2 mph (4
Pre-Collision Braking System
39
Advertisement
Table of Contents
