Table of Contents
Advertisement
Pre-Collision Braking System
Continued from previous page
• The system may not operate correctly under the conditions listed below.
When these conditions occur, turn off the Pre-Collision Braking System.
- The tire pressure is not correct.
- The temporary spare tire is installed.
- Tires that are unevenly worn or tires with uneven wear patterns are
*1
installed.
- Tires that are the wrong size are installed.
- A flat tire has been fixed temporarily with a tire repair kit.
- The suspension has been modified (including a genuine SUBARU suspen-
sion that has been modified).
- An object that obstructs the stereo camera's view is installed on the vehicle.
- The headlights are dirty or they have snow and ice or dirt on them. (Objects
are not correctly illuminated and are difficult to detect.)
- The optical axes are not aligned correctly. (Objects are not correctly illumi-
nated and are difficult to detect.)
- The lights including headlights and fog lights have been modified.
- Vehicle operation has become unstable due to an accident or malfunction.
- The brake system warning light is illuminated in red.
- A heavy cargo is loaded onto or inside the vehicle.
- The maximum number of occupants is exceeded.
- The combination meter is not operating properly such as when the lights do
not illuminate, the beeps do not sound, the display is different from when it
is normal, etc.
*1: The wheels and tires have functions that are critically important. Be sure to
use the correct ones. For details, refer to the Owner's Manual for your
vehicle.
*2: If the brake system warning light does not turn off, immediately pull the
vehicle over in a safe place and contact a SUBARU dealer to have the
system inspected. For details, refer to the Owner's Manual for your vehi-
cle.
*3: For details about the combination meter, refer to the Owner's Manual for
your vehicle.
32
*1
*3
*1
*1
*2
Advertisement
Table of Contents
