Table of Contents
Advertisement
How to use Adaptive Cruise Control
■ Setting Adaptive Cruise Control
(1) Setting Adaptive Cruise Control to standby status
Press the
(white) and the following distance setting indicator are displayed on the EyeSight display
area of the combination meter display.
The set vehicle speed display will read "- -MPH (- - - km/h)".
To set the ready status:
Adaptive Cruise Control can be activated
when all of the following conditions are
met and
played on the EyeSight display area.
- All doors (except the trunk) are closed.
- The driver's seatbelt is fastened.
- The electronic parking brake is not
engaged. The electronic parking brake
indicator light is turned off.
- The select lever is in the
and the paddle shift is not operated.
- The brake pedal is not depressed while driving or the brake pedal is strongly
depressed while stopping.
- EyeSight operation is not temporarily stopped.
cator: White) is turned off.
Page 112
(CRUISE) switch. At this time,
S03440
(READY indicator) is dis-
position
D
Adaptive Cruise Control
(Adaptive Cruise Control indicator)
Following
distance
setting
indicator
Adaptive
Cruise
Control
indicator
(white)
READY
indicator
A
(EyeSight Temporary Stop indi-
MPG
MPH
miles
S03568
MPG
MPH
D
miles
S03992
51
Advertisement
Table of Contents
