Table of Contents
Advertisement
■ Canceling Lane Departure Prevention Function
●
Canceling by driver operation
Any of the following operations temporarily cancels the Lane Departure Prevention Func-
tion.
While temporarily canceling this function,
EyeSight display area illuminates in white and the lane indicator is turned off.
• Depressing the brake pedal
• Operating the turn signal lever
• The system determines that the driver operates the steering wheel to make a lane
change.
• Turning on the hazard warning flasher switch
●
Automatic cancellation by the system
Under the following conditions, a notification will sound 1 short beep and 1 long beep and
the Lane Departure Prevention Function is temporarily canceled.
While the function is temporarily canceled,
(Lane Keep Assist indicator) on the
EyeSight display area illuminates in white
and the lane indicator is turned off. Also, the
Lane Keep Assist cancellation message is
displayed on the combination meter display.
• The system does not detect the lane mark-
ings.
• The windshield wiper operates at a high
speed.
• The vehicle speed is less than approxi-
mately 34 mph (55 km/h) or is more than
approximately 93 mph (150 km/h)*.
*: For Mexico models, approximately 205 km/h.
• The Vehicle Dynamics Control or the Traction Control Function is activated.
• Either the driver's door, the front passenger's door or the rear door is open.
• The seatbelt of driver's seat is unfastened.
• The electronic parking brake is applied.
• The select lever is moved to a position other than
- Lane Departure Prevention Function can be resumed after the select lever is returned
D
M
to the
or
position.
(Lane Keep Assist indicator) on the
MPG
D
A
D
M
or
.
Lane Keep Assist
miles
S03999
77
Advertisement
Table of Contents
