Table of Contents
Advertisement
Adaptive Cruise Control
■ Stay-stopped function
If the vehicle in front comes to a stop while you are utilizing Adaptive Cruise Control, your
vehicle will also come to a stop and will stay stopped.
Once your vehicle has come to a complete stop with the vehicle in front, Adaptive Cruise
Control is paused and the stay-stopped function is engaged.
EyeSight display area is turned off and
are displayed. At the same time,
white.
Regardless of whether or not there is a vehicle in front, if the brake pedal is strongly
depressed while the vehicle is stopped,
RES/+ switch or SET/- switch at this time activates the stay-stopped function.
When starting the stay-stopped function,
(READY indicator) turns off.
brake pedal.
CAUTION
Approximately 1 second is required from when the vehicle stops until the stay-
stopped function activates. Because there is the possibility that the vehicle may
start moving before the stay-stopped function activates, pay attention to the sur-
roundings and depress the brake pedal as necessary.
If you apply the brake pedal softly, the stay-stopped function may not start. In
this case,
60
(Adaptive Cruise Control indicator) is turned back to
S01887
(READY indicator) will illuminate again by releasing the
NOTE
(READY indicator) will not illuminate.
(HOLD indicator) and
HOLD is
displayed.
(READY indicator) illuminates. Operating the
(HOLD indicator) illuminates and
(SET indicator) on the
(READY indicator)
MPG
MPH
miles
S03996
Advertisement
Table of Contents
