Husqvarna K1270 II Workshop Manual page 64

6.16.3 To assemble the throttle trigger and throttle
lock
The spindles for the throttle trigger and the throttle
control wheel must be installed from the right side.
1. Install the throttle trigger from the carburetor area
(A). Make sure that the spring comes out through
the handle (B).
A
2. Install the wire into the throttle control wheel.
3. Install the throttle control wheel (A). Secure it with a
pin (B).
64 - Repair and servicing
B
B
A
4. Install the right handle side.
5. Install the throttle lock.
1273 - 001 - 04.11.2019