3. Remove the cable clamp for the throttle cable from
the throttle lever. Refer to
trigger and throttle lock on page 62 .
4. Remove the tube to the air purge bulb. Refer to
remove the carburetor on page 18 .
5. Remove the fuel hose. Refer to
carburetor on page 18 .
6. Remove the water hose at the valve. Refer to
remove the cutting head on page 16 .
7. Remove the 6 screws for the vibration damping
units.
22 - Product overview for repair
and servicing
To remove the throttle
To
To remove the
To
8. Remove the engine unit from the handle unit.
9. Remove the vibration damping units.
1273 - 001 - 04.11.2019