4. Loosen the screw.
5. Remove the inlet manifold from the cylinder.
6. Remove the impulse hose (A) from the flange.
B
7. Push down the insulation wall (B).
1273 - 001 - 04.11.2019
8. Remove the flange from the inlet manifold.
5.3.10 To remove the inlet nozzle
1. Remove the cylinder. Refer to
cylinder on page 42 .
2. Turn the flywheel to get access to the screw for the
inlet nozzle.
3. Remove the screw and the inlet nozzle.
A
5.3.11 To remove the vibration damping units
1. Remove the cylinder cover. Refer to
cylinder on page 42 .
2. Remove the starter. Refer to
on page 16 .
To remove the
To remove the
To remove the starter
Product overview for repair and
servicing - 21