Table of Contents
Advertisement
Symptom
Displayed message
There was an operating failure
of the A/D conversion device
inside the instrument.
There was an operating failure
of light output circuit charging
inside the instrument.
There was an operating failure
of the light output circuit inside
the instrument.
There was an operating
failure of a motor inside the
instrument.
There was an operating
failure of memory inside the
instrument.
The camera used to capture
viewfinder images is not
operating.
Possible cause
The A/D conversion device
installed in the instrument has
failed.
Charging of the light output
circuit is not completed. The
light output circuit is not
operating correctly.
The light output circuit
installed in the instrument is
not operating correctly.
The motor that performs
switching of the measurement
area, SCI/SCE, and gloss
measurement is not operating
correctly.
The memory installed in the
instrument is not operating
correctly.
The camera installed in the
instrument is not operating
correctly.
34
Correction
Turn the power OFF and then
turn it ON again. If the message
is displayed again, contact a
KONICA MINOLTA-authorized
service facility.
Advertisement
Table of Contents
