Adjusting The Electric Clutch - Toro Z Master Professional 7000 Series Operator's Manual

Figure 67
1. Gearbox
2. Side plug
Changing the Gearbox Oil
Service Interval: After the first 100 hours
Yearly
Contact an Authorized Service Dealer to change the
gearbox oil.
g001156
3. Pulley
4. Rear plug
Adjusting the Electric
Clutch
Service Interval: Every 500 hours
The clutch is adjustable to ensure proper engagement
and proper braking.
1. Park the machine on a level surface, disengage
the blade-control switch, and engage the parking
brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Unlatch the seat and tip it forward.
4. Loosen the front engine panel knobs and
remove the panel.
5. Pull up on the spring-loaded idler pulley for the
PTO-drive belt and remove the belt from the
clutch pulley (Figure
1. Spring-loaded idler pulley
2. Clutch
6. Unplug the electric connection for the clutch
(Figure 69).
7. Remove the 2 bolts holding the rubber clutch
strap to the mower frame
8. Remove the center bolt holding the clutch to
the engine shaft and remove the clutch and key
(Figure 69).
50
68).
Figure 68
3. PTO-drive belt
4. Gearbox
(Figure 69).
g007167