Product Overview; Controls - Toro Z Master Professional 7000 Series Operator's Manual

Product Overview

1. Height of cut deck-lift
pedal
2. Parking-brake lever
3. Transport lock
4. Motion-control lever
5. Roll bar
6. Engine screen
Figure 4
7. Fuel cap
8. Seat belt

9. Controls

10. Mower deck
11. Caster wheel
Controls
Become familiar with all the controls before you start
the engine and operate the machine.
Control Panel
g208514
1. Hour meter
2. Key switch
3. Fuel-selector valve
4. Audible alarm
5. Glow-plug switch
Key Switch
The key switch, used to start and shut off the engine,
has 3 positions: O
Starting the Engine in Normal Weather (page
Hour Meter
The hour meter records the number of hours the
engine has operated. It operates when the engine
is running. Use these times for scheduling regular
maintenance (Figure
Safety-Interlock Indicators
There are symbols on the hour meter that indicate
with a black triangle that the interlock component is
positioned correctly
Battery-Indicator Light
If you turn the key switch to the O
few seconds, the battery voltage displays in the area
where the hours are normally displayed.
14
Figure 5
6. Glow-plug light
7. Engine-temperature light
8. Throttle control
9. PTO switch
, R , and S . Refer to
FF UN TART
5).
(Figure 6).
position for a
N
g010363
24).