Milnor 42 Series Maintenance Manual page 36

Chapter 3. Routine Maintenance
Figure 10: Soap Chute and Optional 5-compartment Supply Injector. These are examples. Your
machine can look different.
Soap Chute
1. Do not let chemical supplies stay on surfaces.
2. Water pressure regulator. See
3. Adjustment screw
4. Water pressure gauge.
5. Strainer inside
.
CAUTION 27 : Risk of injury and damage—Chemical supplies can splash on personnel
and machine surfaces if water pressure is too high.
• Make sure the pressure is set as told in the maintenance summary.
Figure 11: Air Tube for the Water Level Sensor. These are examples. Your machine can look
different.
30022T5E Washer-extractor
Legend
1. Level switches
2. Pressure transducer
caution
3. Air tube. See
statement 28
.
4. Air chamber
PELLERIN MILNOR CORPORATION
Supply Injector
Legend
caution statement 27
42044SP2 Washer-extractor
30022V6J Washer-extractor
32
Flush Water Adjustment
Components
.
36030F8_ Washer-extractor