Milnor 42 Series Maintenance Manual page 15

Safety compliance to the standard is described in detail in MILNOR manual (see the declaration
for your machine).
This letter confirms that the machine(s) only meets the required aforementioned standards. It is
the responsibility of the installer/owner of the machine(s) to ensure compliance with all
requirements for on-site preparation, installation, and operation.
Our conformance to the above listed standards is certified with exceptions listed in MILNOR
Conformance Report (see the declaration for your machine).
Place Kenner, Louisiana, 70063, USA
Date of first issue of above mentioned machine type
Signature Kenneth W. Gaulter
Signature Russell H. Poy
Chapter 1. Machine Description, Identification, and Certification
Engineering Manager
Vice President, Engineering
— End of BIWUUL01 —
11
PELLERIN MILNOR CORPORATION